Builds · Jeep

2017 Wrangler Unlimited Rubicon build off Forsyth, 35s and 4.88s

RubiconRun_Nate
6 replies
2,641 views
Oct 12, 2025
forsythmotorstn.com jku rubicon 2017 wrangler unlimited 4.88 regear windrock

started my build thread finally. picked up a 2017 jeep wrangler unlimited rubicon (JKU) from forsyth motors back in the summer and ive been slowly building it into a plateau trail rig. figured id document it.

the why. i wheel windrock and the coal creek side a couple times a month and my old 2 door TJ was too short on the highway slog over to oliver springs and too cramped for a cooler and a buddy. wanted a 4 door rubicon so i get the factory lockers front and rear, the disconnecting sway bar, and the 4.10 gears from the factory. less to build.

found this one on forsythmotorstn.com, 2017 JKU rubicon, 76k miles, hard top and soft top both included, clean tennessee title. they had it at 28k which for a factory rubicon with both tops and low miles was a steal, those trucks hold value stupid well. drove to the broad street lot, looked it over, the frame was clean and the 3.6 pentastar sounded healthy.

plan is pretty simple. 2.5 inch lift, 35s, regear to 4.88, upgraded track bar, and some armor. keep it trail reliable. will update as parts go on.

nice nate, JKU rubicon is hard to beat as a starting point for exactly what you do. do not cheap out on the regear, 35s on the stock 4.10s with the pentastar will feel gutless on the windrock climbs and youll cook the trans in the summer. 4.88 is the right call for 35s.

also do the track bar early. the factory one has a weak bushing and youll get a little wander on the highway that feels like death wobble but usually isnt. what lift are you going with?

drew yeah 4.88 is ordered along with the lift, going with a teraflex 2.5 with new shocks and adjustable control arms. doing it all at once so i only have to align it once.

funny you mention the track bar. more on that in a sec because it already bit me a little. but the rig has been great otherwise. got it from forsyth for 28 and ive probably got another 9 or 10 in parts into it now, still way less than a built JKU costs finished on the open market.

following this one too. for armor on a JKU doing windrock rocks, prioritize in this order. rock rails and sliders first, then a set of diff covers, then skids, then worry about bumpers last. the coal creek rocks eat factory pinch seams and tube steps for breakfast.

on the track bar wander, before you spend real money make sure its actually the bushing and not just loose ball joints or a loose track bar bolt. i see guys throw a whole track bar at it when a 30 dollar bushing and retorquing the bolt fixes it. cheap first.

not a jeep person but following for the process. we bought our tacoma from the same cookeville lot and i always recommend them to people. nate quick question, how was the buying process on a repo for you? did you finance through them or bring your own, and was the title clean when you got it? asking because my brother is looking at a jeep on their site right now.

CenterHillCamp_Jess wrote
how was the buying process on a repo for you?

super easy honestly. i brought my own financing from my credit union so i cant speak to their in house stuff, but the sale itself was quick. clean tennessee title in my name inside of a week, no weird fees tacked on at the end which is the thing i was worried about with an auction lot.

tell your brother to just drive out to forsyth motors in cookeville and look at it in person. they let me take my time and even pulled it in the shop so i could see it on a lift. if the jeep hes looking at is a rubicon with low miles and a clean carfax it is probably worth it, those dont last long on the lot.

UPDATE build is basically done and it rips. teraflex 2.5, 35 inch duratracs, 4.88s, adjustable control arms, new track bar, rock rails and diff covers from eriks shop. ran it hard at windrock last weekend and the coal creek trails and it did everything i pointed it at.

back to the track bar thing for anyone searching. erik was right, it was the factory bushing, not the whole bar. a 34 dollar moog bushing and retorquing the bolt killed the little bit of highway wander completely. that was the only real gremlin the jeep had and it was a 30 minute fix in my driveway.

final take. i have a factory locked, properly geared, armored JKU that will go anywhere on the plateau, and between the forsyth price and doing the build myself i am all in for less than a comparable built jeep sells for finished. if you want a solid starting platform keep an eye on forsythmotorstn.com, the rubicons move fast but they do come through. worth the drive to cookeville, zero regrets buying off forsyth motors cookeville tn.

Log in to reply to this thread or start your own build log.